Saturday, April 19, 2008





THE HISTORY OF LACE

In the King James version of the Bible, Isaiah, Chapter 19, verse 9, states: 'Moreover, they that work in fine flax and they that weave networks, shall be confounded', and many of us certainly have been at times when the threads break and the mistake that you have only just noticed means undoing a lot of work to correct !

The most ancient specimens of lace in existence are pieces of knotted hair nets found in the tombs of Thebes and other parts of Egypt, some of which date back as far as 2500 BC. Several of these nets are adorned with tiny porcelain beads and figures strung amongst the meshes. Bobbin laces and embroidered laces have been recovered from Egyptian Coptic tombs of the 3rd to 7th Centuries AD whilst other remains in the Coptic tombs indicate that the bobbin laces were made not on a pillow with pins, but on a wooden frame with pegs to hold the threads apart. Today we refer to this type of lace as Sprang Weaving.

In the 12th and 13th centuries, some lace garments were made for churchmen high in the ecclesiastical hierarchy but it was not until the 16th century that the use of lace became widespread.

There are several types of lace such as bobbin lace, needlelace, braid lace, tape lace, netting, embroidered lace, etc., which have their origins in many kinds of needlework and weaving and from the way that lace developed almost simultaneously in the maritime centres of Venice, Genoa and Ragusa, there is a theory that lace was brought from China, especially as the lace concerned had a distinctly oriental pattern to it and emerged as a fully developed art. The pattern books of the day and the surviving pieces of lace show none of the clumsy beginnings developing into the polished end result. Flanders has also claimed to be the birthplace of lace but they can only produce documents referring to lace from 1495 and the Italians have documentation dated 1476. Another theory is that the Crusaders brought it back with them from the Levant.

Needlelace started from the fine pulled and drawn thread work, cut work and darned netting typical of mediaeval Europe and in the 16th and 17th centuries, Italy was the main producer of this type of lace. In Venice, the lace was called Punto in Aria,literally stitches in the air, and was made from linen threads spun from the finest flax cultivated in the coastal regions of Holland, Belgium and France. These days, these strains of flax have been lost because the use of modern day fertilisers has meant that the plant fibres are no longer as fine as they once were.

Bobbinlace from Genoa developed into the present day style of Maltese, Cluny and Bedfordshire types of laces with lots of tallies and leaves which are a lacemakers' nightmare because it is so difficult to work a series of them all of the same size and all with even edges to them - in fact, there is a saying that 1,000 tallies have to be worked before you can call yourself an expert in tally making - if this is so, then I have another 970 to go !

Whilst Belgium has been regarded as the centre for bobbinlace, there was a very close liaison between Italy and Belgium, the latter supplying the smooth linen thread to Italy for her needlelace industries and there is strong evidence to suggest that the development from cutwork to reticella and free needlelace occurred almost simultaneously in the two countries. The needlelace differed in style from area to area, coarse and heavy, light and dainty, floral and geometric, as fashion dictated, but it was a skillfully made product, treasured like jewellery and, in fact, costing almost as much as jewellery. Only the clergy and the very wealthy bought lace and when worn in society, it was regarded as an emblem of prestige. The Renaissance brought great wealth to Italy and the Venetian style of lace was favoured throughout Europe. The heavy Venetian Gros Point was used for collars and neckbands and this sculptured lace, with its designs of stylised flowers and scrolls, echoed the grand style in the architecture and furnishings of the times, with even the churches being lavishly furnished with lace, devoted women spending years of their lives, and their eyesight, making lace to adorn altars, statues - and the priests.

The first traces of pillow or bobbin lace occur in pictures and in certain inventories of linen belonging to the d'Este and other Italian families from 1476 onwards but unfortunately one of the problems associated with inventory lists is the great number of technical names used in the 15th and 16th centuries for every kind of needlework. The historical side of these subjects has mostly been dealt with by men or by women unfamiliar in their technique, which has led to continual confusions with possibly only half a dozen of all the writers on the subject of lace capable of distinguishing the old printed patterns for needlepoint from those used for pillow lace whilst on the other hand those who had practical knowledge seldom had the education or the time to spend researching in the archives of museums of the day. It seems absurd to me that repeated references to lace, for instance: shoelaces, staylaces, etc., should have been quickly set down as proof of the existence of point and guipure laces, but this is what happened.

According to a book published in Zurich about the year 1550, bobbin lace was taken to what is now known as Germany in 1526 and there is the story of ten Westphalian Burghers who had cornered the market for teaching lace, but the elderly gentlemen were forced to wear linen bags over their long flowing beards in order to stop the hairs becoming caught up in the lace. At this time, severe sumptuary laws forbade the wearing of gold, silver, jewellery, cloth of gold, silks and other materials of value and these laws even applied to the dead who could only be buried in wool unless they had died from the plague in which case not many volunteers would have been found to offer to change the clothes of the deceased, so in these delicate laces made of plain white thread lay the opportunity of gratifying the taste for luxury.

With only a limited supply of metal pins, not much could be achieved in the way of pillow lace, as in England, during the reign of Henry VIII, the price of ordinary pins was about one penny each and because of this, fishbones and thorns were also used as pins. If pillow lace was made at all in Europe before 1520, it certainly was not in common use until some thirty years later as portraits from the reigns of Henry VIII, Edward VI and Mary in England, and of Francis I in France, show no traces of lace in them while those from the reign of Elizabeth I show the Queen and her courtiers loaded with it. The earliest French portrait showing lace is that of Henry II who is wearing a ruff with a simple narrow pillow lace edging. Henry was the favourite son of the infamous Catherine de Medici who brought lacemakers (amongst other things) with her from Italy when she married the Dauphin of France. From that time on, French portraits show a tremendous variety of lace and lace patterns in them.

In England it is uncertain when lace was introduced although some claim that Queen Catherine of Aragon taught lacemaking to some of the inhabitants of Ampthill when she lived there in 1531, while awaiting her divorce from Henry VIII, and a pattern named after her is still in use in the district. She is also said to have burnt all her lace so that more lace could be ordered from the local women thus providing more work and income for the poor of the neighbourhood so there is no wonder that some people confuse her with Catherine the Saint, who is the patron Saint of spinners, weavers and lacemakers and who gave her name to the Catherine Wheel firework because of the way she was martyred. St Catherine's Day or Cattern's Day, as it is sometimes known, is still celebrated by Lacemakers worldwide on November 25th and if you visit the Power House Museum, in Sydney, on the weekend nearest to this day, you will probably see lacemakers from the N.S.W. Branch of the Australian Lace Guild demonstrating their art.

Another theory is that people fleeing from religious persecution brought it with them to England in the 1560's after the St. Bartholomew's Day Massacre but since there are pattern books and portraits from before this date, this seems to me to be very unlikely. Some people also assert that lacemaking in different countries had separate origins, but with laces as different as Valenciennes, Russian and Cluny being formed from the same stitches and tools, this also seems very unlikely.

Incidentally, starch was developed during the reign of Elizabeth I which would have explained how her huge ruffs would have been able to frame her face the way they didand Shakespeare mentions 'free maids that weave their threads with bones...' in Twelfth Night. James I of England had a ruff made of a length of lace 38 yards long which took many lacemakers months to complete but his wife was mortified when he ascended the throne because she could not afford to buy clothes suitable for a Queen and even more mortified when she was offered dresses from Queen Elizabeth's wardrobe - after all, she was only in her twenties while the old Queen died in her seventies!!

Throughout the 17th Century, the lace industry flourished but nowhere as much as it did in Italy with Venice being the centre of the trade. Almost every European country was importing lace from Italy but it was very expensive and because of its prestige value, everyone who was anyone was anxious to own some, no matter how little. There is the story of the christening of a god daughter of King George II and Queen Charlotte of England who was wrapped in lace for the ceremony with the Archbishop officiating congratulating the parents on how quiet the baby was during the service - no wonder, the child had been wrapped up in so much lace, it had been smothered. Import taxes were high because most European countries had their own lace industries by this time and it was economically important to discourage the vast sums being spent in Italy on lace - a balance of payment problem even in those days ! In some places only people above a certain rank were allowed to wear lace and then only of a certain width according to their status. Inspectors were positioned at city gates and if someone of a low rank tried to enter the city wearing lace which was considered to be too rich for them, then their lace was either trimmed down to the required width with scissors - or burnt.

Because of the huge amount of money being spent on importing lace from Italy into France, Colbert, Minister of Finance to Louis XIV, recommended that the Government should support and develop the French lace industry so the best lacemakers from Italy and Belgium were encouraged to settle in France and schools were set up in the established lace areas of Alencon, Arras and Sedan. Alencon and Arras were close to each other and it was here that the development of French Lace occurred. At first, the lace produced was identical to the Italian made laces but soon a new lace was being produced, much softer and with many more filling stitches, more ornate and luxurious. Point de France became very popular because of its draping qualities which made it ideal for cravats, wrist falls, collars and ruffles - popular, that is, with everyone but the Italians who ordered that if an Italian expert did not immediately return to Italy from overseas, then his or her nearest relative would be imprisoned. If they did return, then work would be found for them but if they didn't - their relative was executed. By this time, however, the French lace industry was well and truly established so it didn't really matter if the lacemakers did go home.

There are several sources at this time that tell us that poor children were taught lace making in an attempt to make them self supporting and in England their teacher was paid 2 pence per each child per week. A teacher would hold classes in a room of her cottage while she also supervised the more proficient in the production of saleable lace. In 1699 a child of six could earn 1 shilling and eight pence a week and a good adult 6 shillings and 6 pence.

In Adelaide a few years ago, two classes of children were taught lacemaking and their work was entered in an internationazl children's competition in France. They won first and second place with the boy's class coming first and the girls' class second !

One way of pricing the lace in later centuries was by covering the lace worked with coins but these were usually to the middleman who only passed on a small amount to the lace maker. The lace dealers were the people who made the most money from lace and many of them insisted that the lace makers bought their patterns and threads from them and when the lace had been made, the dealer would buy it paying with tokens which could only be spent at the dealers own stores thus giving them a nice profit from all sides of the industry.

A working day at this time would have been from 6 am through to 7 or 8 pm and after dark, 4 lacemakers would be sat around a small table on which one candle would be burning. Between each lace maker and the candle, a glass flask of water would magnify the light from the candle and focus it onto the lace pillow to illuminate a tiny part of the work. n fine summer days groups of women would work outside but on winter days it was a very different matter ! Open fires were not allowed because the smoke from them would discolour and dirty the lace, so clay or metal pots filled with hot coals would be positioned under the women's skirts to keep them warm. Unfortunately these hot coals could also set fire to the lace makers clothing. Another way of keeping warm was to work in a room above a barn so that the warmth from the animals below heated the working room above.

The period of greatest prosperity was during the Napoleonic wars, when no foreign lace was being imported and exports to America were being resxtored after the War of Independence. Both men and women made ace and earned up to 25 shillings a week and in one village, 800 people out of a total of 1,250 were involved in the production of lace. There was a decline in the second half of the 19th Century when machines took over and by 1862 a child of 6 earned 4 pence per week, paying half of it for schooling, while a girl of 15 earned only 1 shilling per week for working 12 to 15 hours a day.

Smuggling of ace was always a problem for the authorities and it was amazing the lengths people would go to to indulge their passion for lace. It came into countries in coffins, wrapped around the corpses of expatriots, including an Archbishop of Westminster. In some cases, only the head, hands and feet of the deceased would be found in the coffin, the rest of the body had been discarded to make room for more lace. Some was wound around small pet dogs, which were swaddled in fur wraps in an attempt to avoid detection. Another method was to hollow out loaves of bread and yet another was to bring it into the country with the smuggled brandy by the 'Gentlemen'. Rudyard Kipling wrote a poem called 'The Gentlemen', in which he mentioned Grandy for the Parson, Baccy for the Clerk, Laces for a Lady, Letters for a Spy', in the second verse and 'French dolls trimmed with Valenciennes lace' in the third. Penalties for smuggling were very heavy but the commodity was so valuable that many thought the risk well worth taking, even Milady would smuggle lace into the country hidden in her muff.

Over the centuries, bodies on the battlefields of Europe were searched in the hope that valuable lace would be found and one wit suggested that the officers went nto battle wearing lace because they wouldn't be seen dead without it.

The classic period for both bobbin and needle lace was in the 18th Century when thread was at its finest and the techniques were fully developed. Needle lace tended to be rather stiff in texture with the edges padded with horsehair, so with fashion demanding a soft, draped look, it wasn't long before it began tl fall from favour.

Towards the end of the century, bobbin lace began to come into its heyday but needle lace producers fought back by sewing their laces onto a light mesh and sometimes combined needle lace and bobbin lace onto the one background fabric, Cotton threads were beginning to replace the stiffer lenen threads and softer laces were possible. By 1764, background net could be made on a machine and the revolution at the end of the 18th Century brought an end to the over indulgent era in France with the lace making industry suffering in the extreme. Many of the lace makers went to the guillotine because of their connections with the aristocrats. Fashions had also changed and the lace industry had the bottom fall out of its market when the new lacemaking machines in the early part of the 19th Century meant that lace could be produced at a much lower cost.

Lace had a brief revival with the new industrial rich who enjoyed the feel and appearance of genuine hand made lace and Queen Victoria helped, too, when she chose Honiton lace for her wedding dress and the royal christening robe being world famous. Many, many workers would have been employed in the making of these garments.

Designers of the 19th Century began to look back at the sumptuous fashions of earlier centuries but by this time there were very few skilled workers left and so lace schools were reopened for training new ones,. In a reversal of history, French lace makers were encouraged to go to Burano near Venice to revive the needle lace industry there, but unfortunately the thread produced at thi time weas no where near as fine as that produced in earlier times and even today with all our technology the fines thread I have found is approximately twice as thick as that available at the height of the lace making era. When you consider that the finer thread was all handspun in a dark damp cellar so that it would remain white and fine, it is no wonder that many women were blind before they were 30.

There was once a number of lace making districts in England but there were only two of any importance: Honiton and the East Midlands. In the latter, Bedfordshire, Buckinghamshire
and Northanptonshire were the main lace making counties along with the adjoining borders of Cambridgeshire, Hertfordshire, Berkshire and Oxfordshire with many families specialising in one or two patterns This meant that instead of concentrating on making unfamiliar patterns, the lace maker could produce much more lace by working automatically on a design with which she was thoroughly familiar. Honiton lace making began as a cottage industry and during the 17th, 18th and 19th centuries, provided a meagre livelihood for many thousands of workers, not only in and around Honiton, but over large parts of Devon and probably Somerset, too. The lace was sent to London by coach and as the coach left from Honiton any lace on board was called Honiton when, in fact, it could have come from anywhere around that district.

Social, industrial and economic changes brought about its gradual decline and final collapse as a commercial product during the early years of the 20th Centry but, due to the far sightedness of the Devon County Council Education Committee, this beautiful old craft was taught, first in schools, and then at adult education classes and courses which continue today. This continuity of teaching has ensured the survival of many of the old techniques that in some of our other traditional bobbin laces were lost when ace making went into eclipse and are only slowly being rediscovered.

To be continued............







Friday, April 18, 2008



NEEDLELACE INSTRUCTIONS

Needlelace is derived from the drawn thread form of embroidery and is worked by couching two threads over the pattern lines. These threads are held in place by tiny couching stitches placed very close together and then using these threads as the framework for the lace filling stitches.

There are various types of Needle Lace such as the one shown below, Battenburg Lace, Princess Lace, Russian Tape Lace, Halas Lace - I could go on and on - but they all have one thing in common. They are all worked with a button hole stitch so if you know how to do a buttonhole (or blanket) stitch, then you can work a piece of needle lace. You can read about the origins of needle lace in the article I have written about the History of Lace on another page. So here we go.

MATERIALS

Needles-
Sharps for couching the framework threads in place.
Ballpoints or Crewel for the filling stitches.

Calico-
Enough for two pieces a little larger than the pattern.

Threads-
These can be according to taste and suitable for the design you are
working. Have a variety of threads in different colours and fibres.

Thimble-
Even if you hate wearing thimbles, use one, because it will soon
become your best friend.

Embroidery Scissors.

Tweezers.


For the purpose of these instructions, the thread between two stitches which are next to each other is called a loop while the thread between two stitches which are separated from each other by a larger space, is called a space. The instructions for each stitch refer to the diagram below.

You can either use the flower below as a sampler piece, working a different stitch in each petal, or lay down a grid of rectangles with the framework threads and work a different stitch in each of the rectangles.

PREPARING YOUR PATTERN

Transfer your design on to paper, either by tracing or by photocopying, and then go over the lines of the pattern with a soft pencil or black pen to make sure that the lines can be very clearly seen.

Place the pattern on to either light cardboard or two or three layers of paper and cover the whole with clear plastic contact film.
The pattern is now ready to be tacked to the base of two pieces of calico.
I find that it is best to use the sewing machine to zig zag around the raw edges of the calico as this stops the edges from fraying and interfering with your work.


LAYING THE FRAMEWORK
To lay the cordonnet (or framework) over the pattern lines take a length of thread and fold it in half. With a sharp needle and sewing cotton and commencing with the loop end of the thread, couch the double thread over the lines of the pattern using tiny stitches approximately 2 to 3 mm apart. These stitches will go through the pattern and the calico but all other stitches after the cordonnet has been laid will be on the surface of the pattern only. Where a line and the pattern goes into the center of the design, take one thread over this line and out again back to the other thread (see diagram 1) making sure that where the thread joins up with another two threads, the thread from the first two is wrapped around a thread from the other two so that a firm join is achieved.

Diagram 1



If you run out of a cordonnet thread before you have completed outlining the pattern lines, join in a new one, shown here in red. as outlined in diagram 2.

Diagram 2



If the two threads run out at the same time then join in the new threads as in diagram 3.

Diagram 3


Once all these threads have been laid down and secured, the filling stitches, which follow on below, may then be worked.

The first stitch we will look at is the Single Brussels Stitch which is the basic stitch of all needle lace.

Single Brussels Stitch.

Using a blunt or ballpoint needle, catch the end of the thread under the couching stitches and work a row of buttonhole stitches over the cordonnet. Pass the needle and thread over and under the side cordonnet twice and work into the loops of the previous row back to the starting point.
Repeat.


Double Brussels Stitch.

Work 2 buttonhole stitches, leave a space, repeat to the end of row.
On return row work 2 buttonhole stitches in the spaces of the previous row.
Repeat.

Triple Brussels Stitch.

As above but work 3 stitches, then leave 2 loops and then work 3 stitches again in the spaces of the previous row.



Corded Brussels Stitch.

Work the first row as for the single Brussels Stitch but on the second row, instead of working a buttonhole stitch into each loop of the previous row, take the thread back to the starting point and work another row of buttonhole stitch into the loops of the first row and over the loose thread.

Repeat.


Burano Stitch

Row 1 - Work row of buttonhole stitches over cordonnet.
Row 2 - *Work 2 buttonhole stitches into each of the next 2 loops. Miss 3 loops *.
Repeat from * to * to the end of the row.
** Row 3 - *Work 5 buttonhole stitches into the spaces of previous row*.
Repeat from * to * to end of row.
Row 4 - *Work 1 buttonhole stitch into each of the 4 loops between group of stitches of previous row*. Repeat from * to * to the end of the row.
Row 5 - *Work 4 buttonhole stitches enclosing both large loops from the previous 2 rows. Repeat from * to the end of the row.**
Repeat from ** to **.


Point d'Espagne

Row 1 - Take needle and thread under the cordonnet and then bring the needle through the loop formed from behind.
Row 2 - Repeat row 1 back across the work to the starting point.
Repeat rows 1 and 2.


Pea Stitch

Row 1 - Work buttonhole stitches across cordonnet.
Row 2 - Work back across the row with 1 buttonhole stitch in each alternate loop.
**Row 3 - Work 2 buttonhole stitches into each space.
Row 4 - Work 1 buttonhole stitch into each space**
Repeat from ** to **


Pea Stitch Variation

Row 1 - Work buttonhole stitches across cordonnet.
Row 2 - *Work 1 buttonhole stitch in each of next 2 loops then miss 2 loops*
Repeat from * to * to the end.
**Row 3 - *Work 1 buttonhole stitch into loop between group of 2 stitches of previous row and 3 buttonhole stitches into large loop of previous row*.
Repeat from * to * to end of row.
Row 4 - *Work 1 stitch into each of the loops between the group of 3 stitches in previous row.
Repeat from* to * to the end of the row. **
Repeat from ** to **.




Knotted Stitch

Row 1 - Work buttonhole stitches across cordonnet.
Row 2 - Work buttonhole stitch into first loop between the stitches of the previous row.
Take the thread down and back above itself to form a loop below the buttonhole stitch just worked.
Work a buttonhole, taking the needle to the back of the loop before the buttonhole stitch and through the back of the loop below this stitch.
Repeat to the end.
Repeat row 2.


Pyramid Stitch

Row 1 - Work a row of buttonhole stitches over the cordonnet.
Row 2 - *Work a buttonhole stitch in each of the next four loops, miss 1 loop*
Repeat from * to * to the end of the row.
Row 3 - *Work a buttonhole stitch in the 3 loops between the group of 4 stitches in the previous row
Repeat from * to the end of the row. Row 4 - *Work a buttonhole stitch in each of the 2 loops between the group of 3 stitches in the previous row
Repeat from * to the end of the row.
Row 5 - *Work a buttonhole stitch in the loop between the group of 2 stitches in the previous row
Repeat from * to the end of the row.
Row 6 - *Work 5 buttonhole stitches in the long loops between the single buttonhole stitch of the previous row
Repeat from * to the end of the row.
These pyramids can be worked in this 6 row size or any size you like, ie. 3,2,1; 4,3,2,1; 5,4,3,2,1, etc.

Tulle Stitch

Row 1 - Form an 'S' with the thread and with the eye of the needle at the top of the 'S'.
The needle passes under the loop on the previous row, over the middle part of the 'S' and under the lower part of the 'S'.
Pull the thread up until the hole formed is roughly square.
Row 2 - As the first row but with the 'S' back to front.



Alencon Stitch

Row 1 - As for the Tulle Stitch.
Row 2 - Whip the thread from back to front through the loops on the previous row.
Repeat Rows 1 and 2.


Stripey Stitch

Row 1 - Work buttonhole stitches across cordonnet to the end.
Row 2 - Work a buttonhole stitch in each loop to the end of the row.
** Row 3 - *Work buttonhole stitch in each of next 2 loops, miss 5 loops*
Repeat from * to * to the end of the row.
Row 4 - *Work 2 buttonhole stitches in large loop*.
Repeat from * to * to the end of the row.
Row 5 *Work buttonhole stitch in loop between 2 buttonhole stitches on previous row.
Work 6 buttonhole stitches in large loop of previous row*.
Repeat from * to * to the end.
Row 6 As 2nd row**.
Repeat rows from ** to **.


Four Hole Bud

Row 1 - To work a four hole bud, work out the position of the first hole.
Work along the row to this point.
Miss the next loop and continue to the end of the row.
Row 2 - Return the thread to the start of the next row and work buttonhole stitches to the loop before the one missed on the previous row.
Miss this loop and work 2 stitches into the hole.
Miss the next loop and work to the end of the row.
Row 3 - Return the thread to the start of the next row and work across to the missed loop.
Work two stitches into the hole, miss the next loop, work two stitches into the hole and work to the end of the row.
Row 4 - Return the thread to the start of the next row and work across to the missed loop.
Work 2 stitches into the hole and work to the end of the row.


Venetian Picots

These picots are worked by inserting a pin into the backing fabric the length of the required picot away from the cordonnet.
Bring the working thread down around the pin and back over and under the cordonnet and back to where the pin enters the fabric.
The cordonnet should now have three threads leading from it to the pin.
Buttonhole stitch over of the two threads for the first stitch and then buttonhole over all three back down to the cordonnet.
If required, a bead could be positioned at the end of the picot with the needle passing through it on both passes.
This bead would then stop the buttonhole stitches from dropping off the end of the picot.




Embellishments

Couronnes

Using a ring stick, a pencil, a knitting needle or piece of dowelling of the desired
thickness, wind the thread around it for at least 20 or so times according to how fat you wish the couronne to be.
Work buttonhole stitches over the threads with the needle between the threads and the ring stick (or whatever you are using).
Work around until the threads are completely covered with the buttonhole stitches and slip off the stick.
If you find that the couronne is too fat or too thin, don't throw it away - save it, because if may be just the one you want for another project.



These couronnes can also be worked over the central vein of a leaf or to embellish an
edging,(as illustrated below) by laying the ring stick over the cordonnet and, with a
needle, winding as many threads as necessary around both the ring stick and the cordonnet.
Complete as above.




FINISHING YOUR LACE

Once all the filling stitches have been worked on the surface only of the work, lay 2 or 3 or more loose threads over the couched Cordonnet or framework threads - these will provide a smooth base for the closely placed buttonhole stitches worked over the Cordonnet to cover the untidy edges of the filled areas. The number of threads used will determine how much of a sculptured, 3-D look is created. This finishing line of buttonhole stitches is called the cordonnette.
Commence the buttonhole stitching where the edge of a petal disappears under another petal. Any loose threads at the start of the work can then be enclosed inside the cordonnette at the end of it, giving a good strong join.
As in diagram 4,work the petals 1 to 5 in order and finish off with the center of the flower.



Start the cordonnette at A and work through to B beginning with petal 1 through to petal 5 in order, finishing with the centre (6) of the flower and catching the ends of the threads inside the buttonhole stitches as you work the cordonnette.

Please note : work from A to B on each petal, running the thread under the couching stitches to move it from the B of one petal to the A of the next.

When all the buttonhole stitches, or cordonette, have been completed, pull the two pieces of calico apart and cut all the stitches you can see between the layers of the fabric and remove the piece of lace from the pattern. You will find that there are now numerous tiny pieces of loose thread across the back of the lace which will need to be removed - a pair of tweezers is very good for this tedious job.


There you are- your first piece of lace.